Color steel plate

Zhongwei steel wallboard has the main function of shielding, dustproof, moistureproof, fire prevention, heat insulation, energy saving, environmental protection, purification, anti-static etc.. Is a kind of convenient installation, noise noise, antimagnetic interference, shock resistance, acid alkali corrosion resistance, antioxidant, is not easy to bleaching, no color, easy maintenance, not cold, not hot up, installation is convenient to clean, elegant, bright fashion, removed for repeated use, human health care, to ensure user safety modernization building high-tech new decorative material. Mainly used in all kinds of computer room of the wall decoration materials, can also be used in all kinds of clean workshop, electronic products production workshop wall and office building function partition wall. At present has been designed for the steel wall decoration engineering experts and computer room more and more customers are respected.
product features:
1, color steel plate surface is 0.6mm coated steel lining, 12mm fireproof gypsum board or interior purification ecological plate. In the structure, the product panel adopts U - shaped edge design, which is convenient for the adjacent wall panels. Color steel plate paint hardening multiple polyester paint; the electrostatic paint spraying process, surface smooth, delicate, does not accumulate the dust, simple maintenance, greatly ensures the room cleanliness requirements.
2, color steel plate with GB8624-1997 A-fire standard, steel wallboard has the characteristics of strong fire resistance. Can fully meet the decoration of fire prevention requirements.
3, color plate, moistureproof mouldproof, alkali resistant, anti-static, noise rate of 500Hz can reach 48dB.
4, color steel plate surface film thickness uniformity and greater than 20 micron, surface coating gloss in accordance with the relevant provisions of GB/T 9754, the product's surface smooth flat no color, color steel surface coating contains anti conductive material, can completely effective dissipation of static charge, its surface resistance value is 5 to 8 10 square ohm, charge decay time in 1 second.
5, the color steel plate coating hardness in line with the relevant provisions of GB/T 6739, with dust and anti - acid and alkali resistance. Product color variety customization can meet the requirements of the office area and the room elegant and beautiful to meet the requirements of modern.
6, the construction of color steel plate impact test of product shock value is 180kgf/ square meters, strong shock resistance.
7, the color steel plate quality is light, the installation period is short, the site is clean, for the entire project saves valuable construction time.
8, the color steel plate can be disassembled and then recovered, can be easy to assemble and disassemble, the maintenance of water and electricity, line reconstruction, and so very convenient. Color steel plate can be arbitrary hole, to install the control switch, a power socket device is very convenient, without additional processing.
9, color wall panels can be tailored for users, customized wall width, thickness and color. Single block of the widest 1200mm, height of 5000 mm. Model specification (0.6mm): 1200mm*2400mm; 1200mm*2600mm; 1200mm*2800mm; 1200mm*3000mm; non standard size customization. Standard color: gray, ivory, and other colors to customize.
10, color steel plate surface color is soft, and the floor, smallpox constitute a unified and harmonious whole, so that the whole space with modern.

Technical index of raw material for color steel plate:
1, the standard substrate: galvanized steel, zinc layer: AZ100 double-sided quality more than 100g/ square meters.
2, color coating (paint plate): yield strength and tensile strength of 408N/ square meters 376N/m square meters;
Elongation 32% meets GB/T12754-2006 requirements. Positive surface for the white plum C816 (PE C816 polyester resin exceed 21 m); primer: 3854 egrets (EP 3854 not less than 9 m).
3, gypsum board: double-sided plaster composite is not less than 0.25mm thick glossy paper making and, actual thickness of 12mm, gypsum density is greater than or equal to 800kg / square meters; positive paper density is equal to or more than 180 g / square meters; on the reverse of the paper density is greater than or equal to 160 g / square meters. In accordance with the combustion performance of a grade A; additional grading in accordance with the requirements of S1, d0, t0 level.
4, adhesive requirements
Use the brand environment-friendly glue, to ensure that the ethyl benzene, formaldehyde and other indoor pollutants do not exceed the standard, high adhesive strength, adhesive performance test of wall not less than 0.16 map, long-term do not fall off.
finished product appearance quality:
Comply with Q/MGSDW0001-2011 requirements
1 wall defect: defect free requirements.
2 the appearance of the wall: no bubble number.
The 3 panel appearance detection requirements, sagging, no hanging drops of orange peel, no ripples, no creases, no garbage bump.
paint and color performance
Meet the following requirements
1, wall painting color difference Delta E<0.18.
2, wall paint film thickness >50 M.
3, wall paint gloss (60 DEG specular reflectance) detection index greater than 20 and less than 30.
4, hardness of the wall panels pencil hardness scratch test: 5H.
5, wall panels adhesion (T bending): no more than 2T film without crack.
 The main technical indexes of auxiliary:
1, Yin angle bending forming is received: sapwood, thickness and material as the motherboard.
2, yang angle edge: aluminum mold custom-made. By two kinds of aluminum combination, thickness of 1.2mm, the length of the optional. Surface effect: do not allow the surface to see the firmware (screws or nails).
3, composite board fixing parts (fastener) material: hot galvanized steel fastener, fixed length not less than 10cm, thickness of 1.00mm.
4, shall be made with the main strip: paint plate through material processing, and the length of plate height.
The wall panels and the installation of the schematic diagram

Product image: